Hack mac laptop to be a mac tablet in 15 minutes
Hack mac laptop to be a mac tablet in 15 minutes
Hack mac laptop to be a mac tablet in 15 minutes
step 1Disasemble laptop screen
Follow the diagram below.
1. first remove the white casing. It is held by 4 allan screws.
2. Remove the metal shielding from the back of the panel, it is held by a few small screws.
step 2.5isassemble tablet
5 screws hold the case together, simply remove them and pull out the panel guts.
step 3.mount the panel on the back of the screen.
place the panel so that the sensor area is not blocked by any circuits. Fasten into place. I used duct tape.
step 4.Tweek in software.
In the wacom software, you can specify the screen area to be effected by tablet input. make the effected area match the shape, size and location of the sensor. this will line the cursor up with your input. This will require a lot of trial and error to get right.
step 5.Enjoy!
I really felt that this needed some drawings. Really the one you saw on there was the only one I did with it before I took it apart. So, I’ll include other stuff I’ve done with the tablet and just assume you didn’t read this paragraph. Enjoy!
